You may be surprised to find just the way to spray on car paint actually can not be difficult. That doesn’t mean that you can just grab a tin of paint and go at it. There are some fundamentals you need to understand. Both in the preparation and application.
Step A:
Prepare by gathering all your items that you are going to need. Any parts that do not need to be sprayed and that can be removed then do so.
Step B:
You will need to analyze the car carefully. These will have to be sanded with 300 grit sand paper. It also allows the spray automobile paint to adhere better. Once you’ve finished sanding, make certain all of the dust soil and debris are taken off the vehicle. It is imperative the car be totally clean.
Measure C:
This will make sure you get an overall even layer of your coloured paint plus helps the paint to stick nicely. When you spray on the primer, make sure you apply light layers and allow for drying in between. The way to spray auto paint takes a little getting used to.
Step D:
Now you are pretty well to the point at which you’re around ready to spray the colour. You may have determined to use the spray auto paint that comes in aerosol cans, or perhaps you’ve opted for the spray gun. Either way, make several practice strokes on an item before you begin with the automobile. Once you’re ready, start the passes with the paint without hesitation. If you hold gun or the spray can in one spot, you’ll end up getting uneven coverage and maybe the paint will run. If this happens you’ve got a significant repair job on your had. You will most likely have instructions as to the best way to spray car paint using the equipment or spray cans.
Step E:
It’s up to you whether you desire to wet sand between coats of color and primer Alloy Wheel Repair Essex paints. Check with someone that is comfortable with how to spray auto paint, or you might want to study this option on the web
Step F:
You’re down to the finishing touches once you are absolutely satisfied with the shade. You will now need to apply several clear coatings. This will give the shine and finished appearance to the car together with protect the finish. It will be up to you personally although likely two layers will be sufficient. Make absolutely certain it is dry in between coats.
Step G:
Once again, you have the alternative of wet sanding if you prefer. Again, it is suggested you ask the advice of individuals which are comfortable with the way to paint a car. You need to wet sand with these grits in this order if you determine to follow this step then. This will remove spots that could be overly heavy in the clear coating application.
Step H:
Step I:
You should now buff the surface. To try this just use a medium cut polish.
Step J:
As a final touch, you may want to apply a couple of layers of wax.